Bite of acidic stone and its benefits for stone polishing

A piece of acid rock is a cube-shaped, rectangular, or bulky piece that consists of an abrasive surface and a base or handle. This tool is widely used in the stone industry. In fact, in stone cutting factories, a piece of acid rock is an essential tool.

 

Acid rock types are made of the best and most resistant minerals so that they can maintain their stability and durability against high pressures and temperatures during abrasion and polishing of rock surfaces.

 

A piece of acid rock is a cube-shaped, rectangular, or bulky piece that consists of an abrasive surface and a base or handle. This tool is widely used in the stone industry. In fact, in stone cutting factories, a piece of acid rock is an essential tool. Acid rock types are made of the best and most resistant minerals so that they can maintain their stability and durability against high pressures and temperatures during abrasion and polishing of rock surfaces.

 

One of the best minerals used to make surface abrasives and to prepare a piece of acid rock is a mineral called alumina or aluminum oxide. In order to become more familiar with this combination and to know its properties, we will provide explanations about this in the next section.

 

Alumina, the best material for the production of polishing and abrasive compounds:

 

Alumina is generally produced in the industry in the form of alpha alumina, beta alumina and gamma alumina and nano-alumina structures. These powder-shaped solid particles are white in color and have excellent physical properties and mechanical properties. These solid powders are placed on a piece of acidic rock as a durable solid surface and when used for polishing, create a proportional pressure on the surface of the stone or other metals or any other piece. In addition to alumina, other compounds such as calcined alumina, aluminum silicate and dolomite are also used to polish surfaces. In general, achieving a polished and smooth surface will be possible by choosing the best abrasives.

 

What are the importance and benefits of an acid rock bite?

 

As mentioned earlier, a piece of acidic stone is a necessary part of polishing the surface of stones in stone cutting factories. When large pieces of travertine and marble or other types of stone enter the factory, they are cut into different dimensions and sizes. Naturally, cut stone surfaces have roughness, pores, depressions, and depressions that, if not removed, compromise the quality of the stone slab or various parts. In this regard, it will be necessary to use a piece of acidic stone prepared using the best abrasives.

 

Acid rock bites can be used for a variety of stones. To produce slabs and tiles from any type of stone, these pieces of polishing stone or sub-acid stone are usually needed.

 

One of the most important factors to consider when designing and producing a variety of acid rock bites is to consider the hardness or softness of the surface of the Saab bite; The same surface that is in contact with the surface of the rocks and is supposed to perform the abrasion process. Stone polishing can remove even undesirable cracks and scratches on the stones and create a good smooth and polished appearance.

 

In view of the above, the alumina powder industry, which produces these materials to make a variety of acid rock bites, pays a lot of attention to an important factor called powder granulation. The morphology of abrasive particles in the bite of acidic rock along with the density of abrasives is of great importance.